 |
TSI External Input Card Model EB allows input of up to 4 channels of analog data, including the once-per-rev(OPR) signal. |
 |
The External Input Card module allows input of four analog and one once-per-rev (OPR) signal, plus up to four channels of digital data, all using a convenient interface box with Status Light, BNCs, and D-Sub connectors. |
|
Hardware Kits for PDPA provide the rugged but precise mounting structure needed for today's PDPA systems. Fast setup and long-term stability are the key features of the TSI PDPA Hardware Kits. |
 |
TSI Laser Power Meters provide a convenient and accurate way to measure Ar ion beam powers, to keep your LDV or PDPA system running at peak efficiency. |
 |
TSI Laser Laser Safety Goggles provide a solid protection from direct and scattered laser beams. We take the guesswork out of selection and purchase of Ar ion, YAG, and YLF safety eyewear, so you can focus on using the system. |
 |
The MDG100 produces a stream of uniform size drops in the range of 50um to 300um. It relies upon an established technique of liquid column excitation to generate the droplet stream. |
|
Mount Kits for PDPA provide the rugged but precise mounting base needed to get the maximum performance from PDPA systems. Easy adjustment and long-term stability are the key features of the TSI Mount Kits. |
 |
The Oil Droplet Generator (TSI Model 9307) is used to produce large quantities of oil droplets for seeding flows when making PIV or LDV measurements. The large droplet output is especially useful for seeding high-speed flows. |
 |
The 10901A Polarization Axis Finder is a unique tool that provides instant indication of a laser beam's polarization axis. No twisting or turning is required. |
 |
TSI Rails provide the most flexible and sturdy support system for any PDPA system. Various lengths are available, to customise the system to the probes and focal lengths used. |
 |
TSI offers a full range of seed particles to satisfy even the most difficult measurement requirements. Available in a full range of materials and sizes, TSI seed particles maximize the potential of PIV and LDV systems. |
 |
TSI's Model 9302 single-jet atomizer generates a polydisperse aerosol stream from a compressed air source. External pressure control and a flexible outlet tube allow the user to put the right amount of aerosol right where its needed. |
 |
The Six-Jet atomizer from TSI is used to generate a polydisperse aerosol in high concentrations, which can be used as seed particles for PIV and LDV measurements. External controls adjust the number of active jets and dilution air flow rate. |
|
Traverse accessories help the user get the most productivity out of their TSI traverse, while enhancing safety of operation. |
 |
Single Axis (1D) Traverse Systems are used for capturing image data at multiple planes in a flow with INSIGHT™ 3G-based PIV, HFR-PIV, PLIF, or Spray Analysis systems. These traverses are also used for capturing size and velocity profiles in a flow with a FLOWSIZER™ |
.jpg) |
TSI T2D and T2DE Two Axis (2D) Traverse Systems are used for capturing image data at multiple planes in a flow with INSIGHT™ 3G software-based PIV, HFR-PIV, PLIF, or Spray Analysis System. |
 |
Three Axis (3D) Heavy-duty Traverse Systems are used for capturing size and velocity profiles in a flow with a three-component FLOWSIZER™ software-based LDV or phase Doppler system. |
 |
Three Axis (3D) Traverse Systems are used for capturing image data at multiple planes in a flow with TSI INSIGHT™ 3G software-based PIV, HFR-PIV, PLIF, or Spray Analysis systems. |
 |
Three Axis (3D) Traverse Systems are used for capturing image data at multiple planes in a flow with INSIGHT™ 3G software-based PIV, HFR-PIV, PLIF, or Spray Analysis systems. |
 |
Turning Mirrors offer the user the convenience of a folded laser beam path, which reduces the footprint of the laser/fiberlight system. |