Probe Supports and Adapters - Single Sensor
Request A Quote
Most TSI Thermal Anemometry probes are built with a plug-in connector. Thus, they require a probe support which serves to support the probe and provide an electrical connection to the anemometer. TSI probe supports come in a wide variety of configurations and lengths, for both single- and dual-sensor probes (standard three-sensor probes are designed with a probe support built-in), and for either gas or liquid flows. Right angle adapters, available for both single- and dual-sensor probes, allow probe mounting in an end flow orientation, even when the probe support is mounted in a cross flow arrangement. Totally immersible probe supports are also available for liquid applications.
Single Sensor, Standard Probe Support Model 1150
Designed for most standard TSI single-sensor, plug-in probes for gas flow applications, Model 1150 provides support and reliable electrical connection. Coaxial construction enables maximum frequency response. Designed for temperatures to 150°C. Comes in three lengths.
1150-6: For 152 mm (6 in.) length
1150-18: For 457 mm (18 in.) length
1150-36: For 915 mm (36 in.) length
Single Sensor, Standard Probe Support Model 1160
Similar to the Model 1150, the Model 1160 is specifically designed to operate in gas flows with elevated temperature environments up to 300°C. Comes in two lengths.
1160-6: For 152 mm (6 in.) length
1160-18: For 457 mm (18 in.) length
Single Sensor, Flexible Probe Support Model 1151-1
1151-1: Convenient support for small spaces and adaptable to many gas flow applications. Designed for temperatures to 150°C.
Single Sensor, Immersible, Flexible Probe Support Model 1159-15
1159-15: Designed for use in small spaces and for immersion of entire probe for liquid flow applications.
Angle Adapter (90°) for Single Sensor Probes Model 1152
1152 : Right-angle bend adds flexibility to probe system by providing access to upstream points with end flow probes. Designed for temperatures to 150°C.